I-3240 ye-Insulating Glass Epoxy Laminate

Inkcazelo emfutshane:

Ibhodi ye-Epoxy yale mveliso: ilaphu lefiber yeglasi lidityaniswe ne-epoxy resin kwaye lenziwe ngokufudumeza kunye nokucinezela.Imodeli yi-3240. Inezixhobo eziphezulu zemishini kwiqondo lokushisa eliphakathi kunye neendawo ezizinzileyo zombane kwiqondo lokushisa eliphezulu.Ifanelekile kwiindawo eziphakamileyo ze-insulation zezakhiwo zoomatshini, izixhobo zombane kunye ne-electronics, ezinezixhobo eziphezulu ze-mechanical kunye ne-dielectric, ukumelana nobushushu obuhle kunye nokuxhathisa ukufuma.Iklasi yokumelana nobushushu E (i-125 degrees).

Ubukhulu obuqhelekileyo: 0.5 ~ 100mm
Ubungakanani obuqhelekileyo: 1020 × 2040mm
Iyafudunyezwa kwaye ikhubazeke kubushushu obuphezulu be-180 ℃, ayifudumezi ngokubanzi nezinye iintsimbi, ezinokubangela ukuguqulwa kwephepha lesinyithi.

Thumela i-imeyile kuthi

Iinkcukacha zeMveliso

Iithegi zeMveliso

Iimpawu zesicelo

1. Iifomu ezahlukeneyo.
2. Kulula ukunyanga.

3. Ukubambelela okuqinileyo.
4. Iifomu ezahlukeneyo.

Iinkcukacha zeMveliso

HAYI.	IIPROPATI	IYUNITHI	UMGANGATHO IXABISO
1	Amandla e-Flexural perpendicular to laminations A: Ngaphantsieqhelekileyoiimeko E-1/150: Ngaphantsi kwe-150±5℃	MPa	≥ 340
2	I-Notch Impact amandla ahambelana ne-lamination(ebomvu)	kJ/m²	≥33
3	Ukumelana ne-insulation emva kokuntywiliselwa emanzini (D-24/23)	Ω	≥5.0X10⁸
4	Amandla e-Dielectric perpendicular to lamination(kwioyile 90±2℃)1.0mm ubukhulu	MV/m	≥14.2
5	Uqhawulo lombane parallel kulamination (kwioyile 90±2℃)	kV	≥35
6	Imvume (48-62Hz)	-	≤ 5.5
7	Imvume(1MHz)	-	≤5.5
8	I-Disipation factor (48-62Hz)		≤0.04
9	Umzi mveliso wokulahla (1MHz)		≤0.04
10	Ukufunxwa kwamanziD24/23, 1.6mm ubukhulu	mg	≤19
11	Ukuxinana	g/cm³	1.70-1.90
12	Ukutsha	Iklasi	-
13	Umbala		Ngokwendalo