Motor Winding Aramid Nomex Electrical AMA Composite Material
| Igama lemveliso: | Iphepha le-Insulation AMA | Impahla engekasilwa: | Aramid + PET Film |
| Umbala: | Mhlophe | Iklasi yeThermal: | IKlasi ye-H, i-180℃ |
| Amandla e-Dielectric: | ≥ 8 KV | Amandla Okuqina (MD): | ≥ 200N/10mm |
| Ukusetyenziswa kwemizi-mveliso: | Isetyenziswa kwiTransformer | Imvelaphi: | HangZhou Zhejiang |
| Ukupakisha: | Ukupakishwa kokuThunyelelwa kwamanye amazwe | ||
I-AMA-Flexible Composite Material Composite Material AMA Insulation Paper
Izinto ezihlanganisiweyo |AM |Iphepha le-Insulation |I-AMA-Flexible Composite Material Composite |Izinto zokugquma koMbane
--Udidi lwe-Insulation: Udidi lwe-H (180 °C)
-Ifilimu yePolyester / Iphepha le-Aramid eliguquguqukayo ILaminate ineempawu eziphezulu ze-dielectric, amandla okukrazula kunye namandla okuqina, ukusebenza kakuhle kokungena
--Njenge-slot, i-interturn kunye ne-liner insulation ye-E-grade motors, iijenereyitha kunye nezixhobo zombane.Ifilimu yepolyester yoshishino lombane ineepropathi eziphezulu ze-dielectric, amandla okukrazula kunye namandla okuqina, ukusebenza kakuhle kokungena.
--H ibakala le-AMA i-polyester yefilimu i-polyester i-fiber composite foil ye-motor, i-stator yombane ejikelezayo kwi-slot insulation, ukugquma kwe-liner kunye nokujika ukujika ukugquma.
--H-iklasi ye-AMA ye-Insulation Paper iphinda isetyenziswe kwi-hard-type transformer coil insulation layer, isiphelo sokugquma, i-liner insulation.
| Indawo yeMvelaphi | eTshayina |
| Igama lebrand | Amaxesha eHangZhou |
| Isiqinisekiso | ISO9001, ROHS, REACH,UL |
| I-AMA-Flexible Composite Material | |
| Ubuncinane boMyinge woMyalelo | 100KGS |
| Ixabiso(iUSD） | 12 ~ 24 / kgs ngokusekelwe kuhlobo lwe-AMA |
| Ukupakisha Iinkcukacha | Ukupakishwa kokuThunyelwa ngaphandle kwesiqhelo |
| Supply Ability | 10000 KGS / ngosuku |
| Ukuhanjiswa kwePort | Shanghai / Ningbo |
| Umbala | Mhlophe |
| Izinto eziphathekayo | Iphepha leAramid + ifilimu yePET |
| Ixesha lokuGcina | Iinyanga ezi-6 |
| Iipropati | Iyunithi | Ixabiso | |||||||||||
| Igama |
| AMA-H | |||||||||||
| Ubukhulu begama | mm | 0.11 | 0.12 | 0.14 | 0.15 | 0.18 | 0.20 | 0.25 | 0.28 | 0.30 | 0.35 | 0.40 | 0.45 |
| Ukunyamezelana | mm | ±0.02 | ±0.02 | ±0.02 | ±0.02 | ±0.02 | ±0.03 | ±0.03 | ±0.03 | ±0.03 | ±0.035 | ±0.040 | ±0.045 |
| Umdibaniso | mil | 1.5-1-1.5 | 1.5-1.5-1.5 | 1.5-2-1.5 | 1.5-3-1.5 | 1.5-4-1.5 | 1.5-5-1.5 | 1.5-6-1.5 | 1.5-7-1.5 | 1.5-7.5-1.5 | 1.5-10-1.5 | 1.5-12-1.5 | 1.5-14-1.5 |
| Into epheleleyo | g/m2 | 117±12 | 132±13 | 152±15 | 187±19 | 221±22 | 256±26 | 291±29 | 345±35 | 376±37 | 431±43 | 501±50 | 571±57 |
| PET-ifilimu | mm | 0.025 | 0.036 | 0.050 | 0.075 | 0.100 | 0.125 | 0.165 | 0.188 | 0.200 | 0.250 | 0.300 | 0.350 |
| Iphepha leAramide | mm | 0.04 | |||||||||||
| Tensile strength ubude ukunqamleza | N/10mm N/10mm | ≥80 ≥70 | ≥90 ≥70 | ≥110 ≥85 | ≥130 ≥100 | ≥145 ≥115 | ≥200 ≥145 | ≥250 ≥225 | ≥260 ≥250 | ≥270 ≥255 | ≥320 ≥295 | ≥340 ≥335 | ≥390 ≥345 |
| Elongation ubude ukunqamleza | % | ≥10 | ≥15 | ≥20 | |||||||||
| ≥20 | ≥25 | ||||||||||||
| Ukutshatyalaliswa kwamandla ombane | KV | ≥6 | ≥7 | ≥8 | ≥11 | ≥12 | ≥14 | ≥15 | ≥19 | ≥20 | ≥23 | ≥25 | ≥28 |
| Ukumanyana (imeko eqhelekileyo) |
| Akukho delamination | |||||||||||
| Ukumanyana (200±2℃,10min) | 20±2℃ 10min | Akukho delamination, akukho amaqamza, akukho nyibilika resin | |||||||||||
| Ukuhlelwa kweThermal |
| Udidi H (180℃) | |||||||||||
